전화문의
조달구매
견적문의
유튜브
smart control melting system
BOARD for ELB expansion of smart snowmelting controller
WS ELB 16 Smart Snow Melting ELB Expansion Board
Introduction
The ELB expansion board can be additionally installed from the 8-circuit terminals installed in the WS-SCT 16 to expand the terminals and enable PC monitoring to check the leakage status, and each device has an expansion function of 8 circuits.
Application
- All snow melting systems (snow melting)
- Outdoor stair snow melting system
- Snow melting system for golf course greens and card roads
- Roof and Gutter Snow Melting Systems
Earth Leakage Status Check Monitor Function
Check the status of earth leakage breaker by monitoring it with a PC
ELB status monitor
WS ELB 16 standard
| Dimension | Output |
|---|---|
| (H)63 x (V)85 x (Height)50 | '+5v relay 1CH |
SMART CONTROL MELTING SYSTEM
Smart remote control controller capable of real-time control through monitoring
WS SCT 16 Automatic Sensor Controller General Purpose
Product content
The snow and ice detection sensor of the heating cable for snow melting is equipped with a humidity sensor and a temperature sensor to supplement the heating element of the heating wire, prevent snow, ice and freezing conditions in advance, and prevent unnecessary energy consumption as it operates according to the user set value.
Application
- All snow melting systems (snow melting)
- Outdoor stair snow melting system
- Snow melting system for golf course greens and card roads
- Roof and Gutter Snow Melting Systems
Desktop and mobile remote control
Equipped with a wired/wireless Ethernet module that can be paralleled depending on site conditions
WS SCT 16 standard
| Dimension | Rated voltage | Main CPU | Firmware |
|---|---|---|---|
| (H)162 x (V)102 x (Height)48 | DV 9~30v 1A | ATMEGA 2560 | Arduino MEGA 2560 |
More convenient and simpler on-site control system
Field control system
WS SCT 16 specifications
| Menu item | Specification | |
|---|---|---|
| Voltage | Rated voltage | DC 9~30V 1A |
| Input | NTC temperature sensor | AD 10bit 3CH |
| Digital input | Switch contact input 4CH | |
| Output | Sensor relay output | +8v sensor heating output 1CH |
| Alarm/heating relay output | 1w relay 1CH | |
| H / W | Main CPU | ATMEGA2560 |
| Firmware | Arduino MEGA 2560 | |
| Temperature | Operating Temperature / Measurement Temperature | -45℃~ 90℃ |
| Operating function | Hot wire heating | Automatic/manual (remote control) |
| Dimension | width x length x height | 162mm x 102mm x 48mm |